|
|
WELCOME TO BEADSELLERMaking Friends, One Bead At A Time "No act of kindness, no matter how small, is ever wasted." ~Aesop FREE JEWELRY MAKING LESSONS
Traditional Knotting Most
pearl necklaces are knotted using a traditional technique. Though it is
a little more difficult than the cheater’s
way, it is not impossible to learn, and it will add an extra
finished look to pearl, as well as, other beaded necklaces. As with most
jewelry techniques, the more you practice, the better you will become.
The most difficult part of traditional knotting is getting the knot snug
up against the bead. I
only knot occasionally. So, I’ve developed a way to knot using either
a corsage pin or an old stick pin that I have. (A straight pin is not
strong enough for this.) For
my way of traditional knotting, along with the corsage or stick pin you
just need your beads and choice of cord. For this demonstration, I’m
using burgundy colored nylon no. 4 cord and 6mm mother of pearl beads.
I’ve chosen to use contrasting colors so they show up better in the
pictures. Of course, if I were to make a necklace, I’d match up my
cord to the color of my beads. First,
the necklace is started as you would any other beaded necklace. Only one
strand of cord is needed for this more traditional technique. Once
the necklace is started, string on the first bead. Now, tie an over hand
knot, but keep it loose.
Insert
the pin through the loose knot.
Now
use the pin to push the knot down towards the bead until the knot and
pin are flush up against the bead.
Here
comes the tricky part. Keep the knot up against the bead (not too tight)
while you slip the pin out. Then take the pin and hold it on top of the
cord and up against the knot. Pull the cord with one hand, and push the
knot against the bead using the pin in your other hand.
Now,
continue doing this after each bead is strung.
All graphics and lessons created by Tammy Powley.
|
BEADSELLER.US © beadseller@beadseller.us